How to videos Software tools


This equipment has been tested and found to comply with the rules for TV bands devices, pursuant to part 15 of the FCC rules. These rules are designed to provide reasonable protection against harmful interference. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the manufacturer, dealer or an experienced radio/TV technician for help.

Application Alerts

  • Content from the MT300-AV appears on sub-channel 3. Make sure you tune the TV accordingly.
  • If you are using the BrightSign XD1230 as an HDMI input source to the MT300-AV. Be sure to power on the XD1230 AFTER you power on the MT300-AV. There is a problem with the hot plug detection between these devices... We are looking into it.

Common Questions

How to I configure my Pico Broadcaster to work on my network? Click HERE for a tutorial

What are broadcast subchannels? Click Here for more information. The MT300 supports an unlimited number of subchannels (so long as you don't exceed channel bandwidth of 19.4Mb/s)

Registered Customer

Login Login to Support zone: Customer Area


Send mail to support@meldtech.com with questions or comments about this web site.
Copyright 2013 MELD Technology Inc.
Last modified: 06/12/13